Lemon Meringue (FSE Cartridge) By Enigma Extracts
*1 gram cartridge, 100% pure flower extracted full spectrum oil with no fillers or additives*
These all ceramic carts have a NiChrome coil encased in ceramic so there is no metal contact to the extract. They pass all of California’s safety regulations and have zero heavy metal contamination. Due to the nature of the raw oil, when below room temperature the oil becomes more viscous. After sitting for a while, you may have to take a harder pull to get it flowing properly. Batteries that have a preheat function such as the Yocan Uni can help ensure good flow in cold temperatures. These are some of the reasons people cut carts like this but that’s not a route we want to take but we are working on other solutions.
Recommended power setting is 2-3.5V depending on your battery and under 10W max.
Recommended batteries are Yocan Uni Pro or iStick Mini.
Using batteries not suited for these carts that result in burnt wick or oil will not be replaced.
Using a battery mod with preheat is highly recommended.
If oil is cold and not flowing well, use pre-heat or cycle the power as you draw in hard to saturate the wick. If you heat the wick dry, or burn oil that doesnt get pulled in, you may see dark backflow from the intake holes.
Use on the lowest power setting that still gives you the desired amount of vapor.
Best flavor retention is at the lowest power settings.
Do not store cartridge in areas warmer than room temperature.
In cold temperatures, warm cartridge in your hand or other source of heat to ensure better flow.